Because of this, the force of the side air bags and curtain air bags inflating can increase the risk of injury if the occupant is too close to, or is against, these air bag modules during inflation.
The side air bags and curtain air bags will deflate quickly after the collision is over. No unauthorized changes should be made to any components or wiring of the side air bags and curtain air bags. This is to prevent accidental inflation of the side air bags and curtain air bags or damage to the side air bag and curtain air bag systems.
This could affect proper operation of the side air bag and curtain air bag systems. For example, do not change the front seat by placing material near the seatback or by installing additional trim material, such as seat covers, around the side air bags. The air bag warning light will turn off after about 7 seconds if the systems are operational.
Also, do not place any objects an umbrella, bag, etc. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. Unauthorized electrical test equipment and probing devices should not be used on the side air bag and curtain air bag systems.
The pretensioners cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. If the vehicle becomes involved in a frontal collision but the pretensioner is not activated, be sure to. No unauthorized changes should be made to any components or wiring of the pretensioners.
This is to prevent damage to or accidental activation of the pretensioners. Tampering with the pretensioner system may result in serious personal injury. Unauthorized electrical test equipment and probing devices should not be used on the pretensioners.
Incorrect disposal procedures could cause personal injury. The pretensioner system activates in conjunction with the supplemental air bag systems. Working with the seat belt retractor, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants.
The pretensioner is encased with the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is released and a loud noise may be heard.
The smoke is not harmful, and it does not indicate a fire. Care should be taken not to inhale it as it may cause irritation and choking. After pretensioner activation, load limiters allow the seat belt to release webbing if necessary to reduce forces against the chest. If any malfunction occurs in the pretensioner system, the supplemental air bag warning light will not come on, will flash intermittently or will turn on for 7 seconds and remain on after the ignition switch has been pushed to the ON position.
In this case, the pretensioner may not function properly. They must be checked and repaired. The supplemental air bag warning light, displayin the instrument panel, monitors the ing circuits of the supplemental front-impact air bag, front seat-mounted side-impact supplemental air bag, roof-mounted curtain side-impact supplemental air bag and seat belt pretensioner systems.
The monitored circuits include the Air bag Control Unit ACU , satellite sensors, crash zone sensor, front air bag modules, side air bag modules, curtain side-impact air bag modules, pretensioners and all related wiring. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing:.
The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position. The supplemental air bag warning light flashes intermittently. The supplemental air bag warning light does not come on at all. Under these conditions, the front air bag, side air bag, curtain air bag or pretensioner systems may not operate properly. To help avoid injury to yourself or others, have your vehicle checked by a dealer as soon as possible.
Once a front air bag, side air bag, or curtain air bag has inflated, the air bag module will not function again and must be replaced. Additionally, if any of the front air bags inflate, the activated pretensioners must also be replaced. The air bag module and pretensioners cannot be repaired. The front air bag, side air bag, curtain air bag and the pretensioner should be inspected by a GT-R certified NISSAN dealer if there is any damage to the front end or side portion of the vehicle.
As a reminder, unless it is damaged, the supplemental air bag warning light will remain illuminated after inflation has occurred.
When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air bags, pretensioners and related parts should be pointed out to the person conducting the maintenance. The ignition switch should always be in the LOCK position when working under the hood or inside the vehicle. Indicator lights. Audible reminders. Warning display. Engine oil low pressure warning. Engine system warning. Shift lever position warning. Transmission system warning.
Transmission oil high temperature warning. Transmission clutch high temperature warning. Parking brake release warning. Low brake fluid warning. AWD clutch high temperature warning. AWD system warning. Low tire pressure warning. Run-flat tire warning. Cruise control system warning. Low fuel warning. Low washer fluid warning. Operation displays. Engine start operation indicator. Steering lock release malfunction indicator. Intelligent Key insertion indicator.
Intelligent Key removal indicator. Intelligent Key battery discharge indicator. Security systems. Vehicle security system. Windshield wiper and washer switch. Using the wipers. Using the washer. Rear window defroster switch.
Headlight and turn signal switch. Xenon headlights. Headlight switch. Hazard warning flasher switch. Heated seats if so equipped. Turning on the heaters. Turning off the heaters. Cup holders. Sunglasses holder. Door pocket. Glove box. Console box. Coat hooks. Power windows. Interior lights. Map lights. Interior light control switch. Vanity mirror lights. Programming trouble-diagnosis. Clearing the programmed information.
If your vehicle is stolen. Outside mirror control switch P. The twin trip odometer distance of individual trips. If gauge is over the normal range, stop the vehicle as soon as safely possible.
If the engine is overheated, continued operation of the vehicle may seriously damage the engine. Do not rev the 1. Operating the engine in the red zone may cause serious engine damage. The engine coolant temperature is within the normal range when the gauge needle points 1 shown in the illustration. The gauge may move slightly during braking, turning, acceleration, or going up or down hills.
Refuel as soon as possible. After a few driving trips, the light should turn off. The indicator blinks if it is not possible to shift M position. The low fuel warning will be indicated on the vehicle information display when the fuel tank is getting low. The upshift indicator operates only when the M position.
Push the ignition switch to the ON position. Note that the function is set to AUTO as the factory default setting. Set the figure at 5, RPM. When breaking-in the vehicle: To help avoid high engine speeds during breakin, set the upshift indicator to less than 3, RPM. There may be a slight difference between the timing of the upshift indicator illumination and the tachometer indication.
When the battery terminal is disconnected, the set memory will be erased and the mode returns to the default. When the battery terminal is disconnected, the set memory will be erased and the setting returns to the default. The vehicle information display can display the following information. Engine oil level display. Transmission system check display.
When the headlights are on, the brightness of the interior switches is also adjusted at the same time. The instrument brightness can be adjusted separately for daytime and nighttime conditions. Warm up the engine in a level location. This is displayed after the engine is started while the transmission system is being checked. It turns off after a few seconds. During the system check, the shift lever P position. During the system check, a thudding operating noise may occur or the engine speed may decrease, however this does not indicate that there is a malfunction.
NOTE: 1. Current fuel consumption. Vehicle speed. Cruise control. Average fuel consumption and speed. Elapsed time and trip computer.
Distance to empty. Outside air temperature. The cruise control display is shown if cruise control is set. The warning display is not shown if there are no conditions to warn the driver. Depending on the driving conditions and other factors, the displayed values may differ from the actual values. The position of the speedometer needle and the speed shown in the vehicle information display may slightly differ. This displays the vehicle speed while driving.
This displays the set cruise control status. NOTE: The cruise control display is shown if cruise control is set. The values are updated approximately every 30 seconds. This displays the elapsed time and trip odometer beginning from the time when the display was last reset.
To reset the display, press and hold the NEXT for more than 1 second. The switch average fuel economy and average vehicle speed are reset at the same time. The switch elapsed time and trip odometer are reset at the same time. This displays the outside air temperature. If the fuel level is low, the low fuel warning will be displayed. This change timing may become earlier depending on the driving conditions.
This does not NOTE:. The outside air temperature may not be displayed correctly in the following cases. When the battery terminal is disconnected, the set memory will be erased and the settings return to the default. This alert informs the driver that the set driving time has elapsed. This alert informs the driver when the outside air temperature is lower than F 38C. Push and hold the switch to increase the number every 1 hour. A maximum of 6 hours can be set. The reminders shown below are used to notify the driver of the maintenance intervals.
NOTE: Because these are displayed based on the mileage driven, they do not indicate the actual conditions of the vehicle. Use these functions only as a reference. To restore the mileage to the original figure after resetting, press the NEXT switch again. When the battery terminal is disconnected, the set mileage will be erased and the settings will return to their default settings.
Engine oil level: This can be used to check the pre-start oil level while the engine is running. On each setting screen, push the NEXT switch to change the mileage. The reminder is displayed when the set mileage is exceeded. The maximum mileage that can be set is 6, miles 10, km. The default setting is 18, miles 30, km. The maximum mileage that can be set is 18, miles 30, km.
NOTE: The default setting is 6, miles 10, km. This function can be used to make settings for language and unit. Warning information is displayed on the vehicle information display. It is also possible to check any warnings that have not been corrected. The following lights will come on: , or , , , , , The following lights come on briefly and then go off: , or , , , , , If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system.
It turns off soon after the engine is started. If the AWD system malfunctions, the warning light will either remain illuminated or blink. If the warning light comes on while driving there may be a malfunction in the AWD system.
If the AWD warning light blinks on when you are driving: — blinks rapidly about twice a second : Pull off the road in a safe area, and idle the engine. If the warning light turns off, you can drive again. If the tire pressure is insufficient, fill with nitrogen gas. If nitrogen gas is not available, compressed air may be safely used under normal driving conditions.
This indicates the ABS is operational. If an ABS malfunction occurs, the anti-lock function is turned off. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied.
Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. Check the brake fluid level.
If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. Your brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous. Charge warning light If the light comes on while the engine is running, it may indicate the charging system is not functioning properly.
Turn the engine off and check the alternator belt. Engine oil pressure warning light This light warns of low engine oil pressure. The engine oil pressure warning light is not designed to indicate a low oil level.
Check the vehicle information display or use the dipstick to check the oil level. Turn off the engine as soon as it is safe to do so. Intelligent Key warning light After the ignition switch is pushed to the ON position, this light comes on for about 2 seconds and then turns off.
This light warns of a malfunction with the electrical steering lock system or the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to free the steering lock or to start the engine. If the light comes on while the engine is running, you can drive the vehicle. After the ignition switch is pushed ON, this light illuminates for about 1 second and turns off.
Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted.
If the vehicle is being driven with one or more flat tires, the warning light will illuminate continuously and a chime will sound for 10 seconds. The chime will only sound at the first indication of a flat tire and the warning light will illuminate continuously. The tire pressure for each tire will also be displayed. The light will remain on after the 1 minute.
If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury.
Check the tire pressure for all four tires. Although you can continue driving with a punctured run-flat tire, remember that vehicle handling stability is reduced, which could lead to an accident and personal injury. Also, driving a long distance at high speeds may damage the tires. The actual distance the vehicle can be driven on a flat tire depends on outside temperature, vehicle load, road conditions and other factors.
When a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly. Be sure to install the specified size of tires on the four wheels.
The tires of this vehicle are filled with nitrogen gas. When the tire pressure is low, fill the tires with nitrogen gas. Supplemental air bag warning light After pushing the ignition switch to the ON position, the supplemental air bag warning light will illuminate for about 7 seconds and then turn off. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing and your vehicle must be taken to a GT-R certified NISSAN dealer.
The supplemental air bag warning light remains on after approximately 7 seconds. Small light indicator light The small light indicator light illuminates when the front clearance lights, instrument panel lights, rear combination lights and license plate lights are on. The indicator light turns off when is turned off. Transmission system malfunction: The light blinks if a malfunction in the transmission system occurs.
If the light blinks, certain gear positions may become unusable, so that the vehicle may become undrivable. Transmission oil temperature high: The light illuminates if the transmission oil temperature becomes unusually high. If the light illuminates, avoid driving at high speed or at high engine speed until the light turns off. Transmission clutch temperature high: The light illuminates if clutch temperature becomes unusually high.
If the light illuminates, pull off the road in a safe area and idle the engine. When the light turns off, driving can be resumed. Continuing to drive with the light on could cause serious damage to the transmission. If the light continues to stay on, engine power will be suppressed and the clutch will not be engaged to prevent serious damage to the clutch. Cruise main switch indicator light The light comes on when the cruise control is pushed.
The light turns off when the main switch is pushed again. While the cruise control system main switch indicator light is on, the cruise control system is operational. Cruise set switch indicator light The light comes on while the vehicle speed is controlled by the cruise control system.
If the light blinks while the engine is running, it may indicate the cruise control system is not functioning properly. Malfunction Indicator Light MIL If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel.
Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons 14 liters of fuel in the fuel tank. Malfunction indicator light on steady — An emission control system malfunction has been detected.
Check the fuel-filler cap. If the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the light should turn off after a vehicle. The light does not few driving trips. You do not need to have your vehicle towed to the dealer. Malfunction indicator light blinking — An engine misfire has been detected which may damage the emission control system.
The malfunction indicator light may stop blinking and remain on. NOTICE Continued vehicle operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control system. Slip indicator light This indicator will blink when the VDC system is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits.
When the VDC off indicator light and slip indicator light come on with the VDC system turned on, this light alerts the driver to the fact that the fail-safe mode is operating, for example the VDC system or the hill start assist system may not be functioning properly.
Make sure the ignition switch is pushed to the OFF position, and take the Intelligent Key with you when leaving the vehicle. Turn the light switch off when you leave the vehicle. Stop the vehicle and release the parking brake. Brake pad wear warning The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion.
This scraping sound will first occur only when the brake pedal is depressed. After the wear of the brake pad is increased, the sound will be heard all the time even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the warning sound is heard. The warnings displayed in the vehicle information display can be switched voluntarily by pushing the ENTER. Ignoring the warning may result in malfunctions and accidents.
A chime also sounds. Make sure the shift lever is placed in a position properly. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty E position. This displays the approximate distance that the vehicle can be driven based on the amount of fuel remaining in the fuel tank and the actual fuel consumption. The low fuel warning will appear when the amount of fuel remaining in the tank decreases to approximately 3 US gallons 12 liters.
The timing of the low fuel warning display may change depending on braking, turning, acceleration, or going up or down hills. The vehicle icon indicates which door or the trunk lid is open.
This will appear when the washer tank fluid is at a low level. Add washer fluid as necessary. No key inside the vehicle The warning appears when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. Make sure that the Intelligent Key is inside the vehicle.
If this warning appears, move the shift lever to P position. If this warning appears, push the ignition switch to the OFF position. If this indicator appears, push the ignition switch while lightly turning the steering wheel right and left.
This indicator appears when the Intelligent Key needs to be inserted into the Intelligent Key port for example, the Intelligent Key battery is discharged. A key reminder chime also sounds. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key s in the vehicle, and always lock it when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.
Vehicle security system If this indicator appears, replace the battery with a new one. Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops.
Check with your insurance company to see if you may be eligible for discounts for various theft protection features. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. Confirm that the security indicator light comes on. The security indicator light stays on for about 30 seconds. The vehicle security system is now pre-armed. After about 30 seconds the vehicle security system automatically shifts into the armed phase.
The security light begins to flash once every approximately 3 seconds. If, during this second pre-arm time period, the door is unlocked, or the ignition switch is pushed to ACC or ON, the system will not arm. How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. Remove the Intelligent Key from the vehicle. Close all doors, hood and trunk. Lock all doors. The doors can be locked with the Intelligent Key, door handle request switch or power door lock switch.
The power door lock switch should be operated while the door is open, and then closed. The alarm is activated by:. Opening the door or the trunk lid without using the button on the Intelligent Key, the door handle request switch or the mechanical key. Even if the door is opened by releasing the door inside lock knob, the alarm will activate.
Opening the hood. Unlocking a door by pushing the door handle request switch. The vehicle security system will give the following alarm:. The headlights blink and the horn sounds intermittently. The alarm automatically turns off after approximately 1 minute. However, the alarm reactivates if the vehicle is tampered with again. Never leave these keys in the vehicle. Operation is subject to the following two conditions; 1 This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation of the device.
Security indicator light The security indicator light is located on the instrument panel. This function indicates the security systems equipped on the vehicle are operational.
In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshield. Do not operate the washer continuously for more than 30 seconds. Do not operate the washer if the reservoir tank is empty. Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reservoir tank.
Do not use the window washer reservoir tank to The windshield wiper and washer operates when the ignition switch is in the ON position. In the MIST position, the wipers operate while the lever is lifted up. When the lever is released, it automatically returns to the OFF position and the wipers stop.
When the speed sensing wiper interval function is turned on, the intermittent operation speed varies in accordance with the vehicle speed.
For example, when the vehicle speed is high, the intermittent operation speed will be faster. If the wiper operation is interrupted by snow or ice, the wiper may stop moving to protect its motor.
If this occurs, turn the wiper switch to the OFF position and remove the snow or ice on and around the wiper arms. In approximately 1 minute, turn the switch on again to operate the wiper. Then the wiper will also operate several times. NOTE: When the level of washer fluid is low, a warning display appears on the vehicle information display. The indicator light on the switch will come on.
Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes. NOTE: When the rear window defroster switch is pressed, the heated outside mirrors also operate at the same time. The life of xenon headlights will be shortened by frequent on-off operation. Skip to the beginning of the images gallery.
Add to Cart. NOTE: This product currently can only be used offline. Secure transaction. This service repair and workshop manual consists of hundreds of pages including the following topics:.
Save hundreds if not thousands of pounds in repair and maintenance costs. Here is what you'll get. Step-by-step factory recommended repair instructions. Unlimited access to personal support reps who are always available to assist you. We can answer your questions about using the software or help you find the specific information you need for your Nissan GT-R. Free real-time updates! Your manual is updated with revised information as soon as it is released.
Access on your terms. Unlimited access to your Nissan GT-R manual on a yearly basis. We'll get you the repair information you need, every time, or we'll refund your purchase in full. Can I see what the manual looks like? See our guarantee below.
0コメント